The necessity of using professional airport lighting solutions |LEDRHYTHM

The necessity of using professional airport lighting solutions! ! |LEDRHYTHM

The necessity of using professional airport lighting solutions! ! |LEDRHYTHM

With the increase in air passenger traffic, the lighting quality of airports, as important transportation hubs, directly affects the travel experience of millions of passengers. At the same time, the energy consumption of lighting fixtures is also one of the major expenses of airport operations. The use of professional LED airport lighting solutions can effectively help airport operators save lighting electricity costs while ensuring a good passenger experience.

Compared with incandescent lamps, LED lighting efficiency is more than five times higher, its service life can reach 50,000 to 100,000 hours, and it can be installed and used for more than 10 years after one installation. Under the same brightness conditions, the use of LED lamps can reduce energy consumption by more than 60%. The combined use of intelligent lighting control systems can achieve centralized control of lights in different areas and different time periods to achieve the best energy-saving effect. The electricity cost savings from LED lighting alone for a large airport can reach hundreds of thousands of yuan per year. At the same time, LED lamps have a long service life, so they also significantly reduce maintenance costs.

And adequate lighting can reduce passengers’ anxiety at the airport and make them feel comfortable and secure.It can also help guide passengers to quickly locate boarding gates, restrooms, restaurants and other places.

Therefore, high-quality airport lighting can not only improve the travel experience of passengers, but also reduce energy consumption expenses for operators. Proper planning of lighting solutions has a profound impact on the operational efficiency of the airport.

The necessity of using professional airport lighting solutions! ! |LEDRHYTHM

The LEDRHYTHM airport lighting solution is based on the safety of airport employees and passengers, and is designed to be an energy-saving and efficient high-pole lighting fixture. The lamps can provide sufficient and uniform illumination to eliminate dark areas and ensure adequate lighting in every corner of the airport to prevent accidents. It adopts anti-glare design and uses soft, natural light to prevent strong light from causing irritating damage to the vision. Using a transparent lampshade and shadow-free structure, the light in the entire space is softer and more natural. Equipped with an intelligent lighting control system to achieve centralized monitoring and management of lamps in all areas. By adopting a safe and intelligent LED airport lighting system, it can greatly improve the safety factor of the entire airport area while ensuring comfort, allowing employees and passengers to travel with peace of mind.

Blog correlati

Le persone chiedono anche

I driver LED sono in c.a. o in c.c.?

Per funzionare, i LED hanno bisogno di una fonte di alimentazione affidabile. Questa alimentazione viene fornita dai driver per LED, che convertono la corrente alternata (CA) in corrente continua (CC). Regolando le variazioni di temperatura e conduttività elettrica dei LED, forniscono un'alimentazione costante e continua.

Ci sono due tipi di driver LED: Driver LED a corrente costante e driver LED a tensione costante.

Le sorgenti di alimentazione per LED che forniscono un'uscita a "corrente costante" sono in genere denominate driver per LED. In passato, gli alimentatori CA-CC che fornivano una "tensione costante" regolata ai LED venivano chiamati alimentatori per LED. Oggi i termini "driver LED" e "alimentatore LED" sono utilizzati in modo intercambiabile.

In alcuni casi, un malfunzionamento del driver LED potrebbe essere attribuito a fattori di temperatura estremamente elevati, poiché il funzionamento a temperature elevate può causare danni ai componenti a causa dell'accumulo di calore. In altri casi, il driver LED potrebbe essere danneggiato dall'instabilità della tensione nella rete elettrica o da sovratensioni causate da fulmini. Inoltre, quando la tensione e la corrente di uscita del driver LED non corrispondono ai parametri elettrici dei chip LED, i LED potrebbero non funzionare correttamente, facendo sospettare un malfunzionamento del driver LED.

Lo sfarfallio è uno degli indicatori più comuni di un driver LED difettoso. Inoltre, anche una variazione della luminosità o della penombra delle luci indica un driver LED difettoso. Infine, se le lampade a LED non funzionano affatto, ciò potrebbe suggerire un problema con il driver LED, l'SPD o la rottura dei LED.